In order to save expenses, reduce losses and faults, we summarize several problems that should be paid attention to in the application of precision bearings.
1、安装镇江INA轴承需要定期维修。安装时要注意。特别是安装、拆卸、清洗和工艺试验需要严格的方法。
1, the installation of Zhenjiang INA bearings need regular maintenance. Attention should be paid to installation. In particular, installation, demolition, cleaning and process tests require rigorous methods.
2、在安装和拆卸不同类型和尺寸的精度轴承时。所使用的工具不同于机械和液压安装方法。轴承安装应在无尘洁净室进行，应仔细选择轴承；轴承安装前应清洁内圈的倾斜，清洁、柔软、无停滞、干燥感，安装量按规定。油和润滑脂，如油雾润滑时应加少量油雾油；轴承安装时应使用专用工具；镇江INA轴承应保持在清洁通风的环境中，无腐蚀性气体，相对湿度不超过65。长期贮存应采取定期防锈措施。
2, when installing and removing different types and sizes of precision bearings. The tools used are different from mechanical and hydraulic installation methods. Bearing installation should be carried out in a dust-free clean room, bearing should be carefully selected; bearing installation should be clean before the inclination of the inner ring, clean, soft, no stagnation, dry feeling, installation according to the provisions. Oil and grease, such as oil mist lubrication should be a small amount of oil mist oil; bearing installation should use special tools; Zhenjiang INA bearings should be kept in a clean and ventilated environment, non-corrosive gas, relative humidity does not exceed 65. Regular rust preventive measures should be taken in long-term storage.
3，清洁对于轴承也是非常重要的。污垢对轴承精度的影响非常明显。如果球的光滑表面受到污染，滚动元件的过度滚动将产生轴承钢的局部压力，这可能导致轴承的不可逆的材料疲劳。此外，外部环境中的灰尘还会对精度镇江INA轴承造成损坏，因此在应用中须确保工作环境干净整洁。
3, cleaning is also very important for bearing. The influence of dirt on bearing accuracy is very obvious. If the smooth surface of the ball is contaminated, excessive rolling of the rolling element will produce local pressure on the bearing steel, which may lead to irreversible material fatigue of the bearing. In addition, the dust in the external environment will also cause damage to the precision Zhenjiang INA bearing, so it is necessary to ensure that the working environment is clean and tidy in application.
雕刻机操作时总会有声音，雕刻机步进电机的每一步都有停顿，在一定的频率下，雕刻机也会产生共振，这样的噪音是正常的，不会影响雕刻机的正常使用。影响雕刻机噪声的因素可归纳如下：
Engraving machine operation will always have sound, engraving machine stepping motor each step has a pause, at a certain frequency, engraving machine will also produce resonance, such noise is normal, will not affect the normal use of engraving machine. The factors that affect the engraving machine noise can be summarized as follows:
雕刻机的噪声证明了镇江INA轴承存在质量问题，或者主轴轴承已经达到使用寿命，或者质量已经磨损或损坏，此时可以考虑更换主轴轴承。雕刻机操作员须根据噪声的原因正确地解决问题。
The noise of the engraving machine proves that there is a quality problem in Zhenjiang INA bearing, or the main shaft bearing has reached the service life, or the quality has been worn or damaged, at this time can consider replacing the main shaft bearing. The engraving machine operator must correctly solve the problem according to the cause of noise.
因此，雕刻机主轴轴承的选择也是非常重要的。直接影响机床或主轴的使用寿命和性能。
Therefore, the selection of spindle bearings for engraving machines is also very important. Directly affects the service life and performance of machine tools or spindles.
雕刻机的轴在行走时发出不同寻常的噪音。这些现象大多存在于雕刻机的X轴上。主要是雕刻机轴电机镇江INA轴承损坏或X轴导轨缺少润滑剂、太脏、太紧、滚珠磨损、滚珠掉落等问题，在存在这种噪声时须及时处理。只有这样才能保证雕刻机的正常使用寿命。
The shaft of the carving machine makes unusual noises when walking. Most of these phenomena exist on the X axis of the engraving machine. Mainly engraving machine shaft motor Zhenjiang INA bearing damage or X-axis guide lack of lubricant, too dirty, too tight, ball wear, ball drop and other problems, in the presence of such noise must be dealt with in time. only in this way can the normal service life of the engraving machine be ensured.
文章来自：镇江SKF轴承 www.wh-skf.com
The article is from: Zhenjiang SKF bearing www.wh-skf.com
文章来自：镇江INA轴承 www.ina-china.cn
The article is from: Zhenjiang INA bearing www.ina-china.cn
文章来自：镇江NSK轴承 www.klbbearings.com
The article is from: Zhenjiang NSK bearing www.klbbearings.com
QQ：524085168
电话：0510-81207777
手机：13311666672
【商家简介】鸿御（上海）国际贸易有限公司是一家以进口轴承销售为主的机电公司，公司位于上海，本公司在工业领域已有多年的轴承配套及工业服务经验，在新老客户有着良好的口碑。公司专业代理进口轴承，涉及品牌：德国FAG轴承、INA轴承，日本NSK轴承、IKO轴承、KOYO轴承、NACHI轴承，瑞典进口轴承，美国TIMKEN轴承等，涉及种类：向心球轴承、向心球面轴承、深沟球轴承、向心球面滚子轴承、圆柱滚子轴承、滚针轴承、向心推力球轴承等。销售行业主要包括:工矿企业、钢厂、机械设备、铁路、工程机械发电厂、石化机械、钻机等 公司以先...
【温馨提示】以上是鸿御（上海）国际贸易有限公司供应的滚针轴承--INA轴承NA4903-雕刻机中镇江INA轴承NA4903噪音与损失的降低的详细信息，欢迎您在驿路商务查看滚针轴承的新的价格、厂家、型号、图片等信息。本页所展示的信息由企业自行提供，内容的真实性、准确性和合法性由发布企业负责，"驿路商务"对此不承担任何保证责任。同时郑重提醒各位买/卖家，交易前请详细核实对方身份，切勿随意打款或发货，谨防上当受骗。如发现虚假信息，请积极举报。[我要举报]
粤公网安备 44190002000523号