MC253SE电动执行器_瑞典TA-MC253SE电动执行器

TA-MC253SEHigh performance proportional actuators with fail-safe extending and automatic stroke adaptation which provide accurate modulating, 3-point or on/off control when used together with combined control and balancing valves – both with or without integrated Δp controller – as well as stand-alone 2-way and 3-way control valves from IMI Hydronic Engineering.产品概述 产品规格照片 

产品信息High performance proportional actuator with fail-safe extending function – 2500 N

High performance proportional actuators with fail-safe extending and automatic stroke adaptation which provide accurate modulating, 3-point or on/off control when used together with combined control and balancing valves – both with or without integrated Δp controller – as well as stand-alone 2-way and 3-way control valves from IMI Hydronic Engineering.

Key featuresEasy commissioning

Automatic measurement and adaptation to the valve lift as well as load-dependent end position switch-off helps to reduce commissioning time and protect the valve and actuator from overloading.

Easy troubleshootingProtected hand drive for a safe manual operation enables easy troubleshooting.

Ease of service

The actuator housing cover is easy to remove. Parameters can easily be changed on site - without using a Laptop.

Technical description

Applications:

For modulating or 3-point control.

Fail-safe function:

Actuator's stem extended on power failure.

Supply voltage:

TA-MC253SE/24: 24V AC ±10%

TA-MC253SE/230: 230V AC +6%, -10%

TA-MC253SE/115: 115V AC +6%, -10%

Frequency 50-60 Hz ±5%

Power consumption:

TA-MC253SE/24: 50 VA

TA-MC253SE/230: 80 VA

TA-MC253SE/115: 80 VA

Input signal:0(2)-10 VDC, Ri ~77 kΩ  0(4)-20 mA, Ri ~510 Ω.Signal direction and starting point adjustable by micro switches. 3-point control.

Output signal:0-10 VDC, max. 8 mA, min. 1,2 kΩ.

Hysteresis:0,05 V, 0,15 V, 0,3 V or 0,5 V

Resolution:Electric: 0,04 VDC    Mechanical: 0,04 mm

Control speed:5 or 2,5 s/mm

Fail-safe speed:0,1 s/mm

Adjusting force:2500 N

Operation mode:S3-50% ED c/h 1200 EN 60034-1End position switch-off:Load-dependent

Automatic detection of the valve lift.

Temperature:Max. ambient temperature: 60°C   Min. ambient temperature: 0°C

Ingress protection:IP 54

Protection class:(according to EN 60730)24 V:   III 230 V: II  115 V: II

Stroke:Max. 40 mmElectrical connection:Actuator with screwed terminals.

Connection to valve:Simple attachment to the valve by means of M8 screws. For some valve types an adapter may be needed, please see accessories section.

Weight:12,5 kg

Colour:Black body and red cover.

Marking:TA, Article No, product name and technical specification.

Actuator variants:- Position switch unit: ?2 switches (WE1/WE2), potential free, infinitely adjustable. ?Rated load: 8 A / 250 VAC, 8 A / 30 VDC. ?Switching voltage: max. 400 VAC, max. 125 VDC.- Ingress protection: IP 65- Output signal: X=0(4)...20 mA- Adapter with coupling for external product