电动执行机构与阀体的安装
Installation of electronic executive body and body of valve
电动执行机构与阀体的安装(图5)指正指SHUT处(全闭位置
1.手动转动阀门,检查无异常情况,并使使阀门处于全闭位置。
Rotate the valve manually and make sure have unusnalsituation to check and make the valve in a completely closing position.
2.将支架固定在阀门上。 详情联系王经理:153,8032,9557(wei 信同号)
Fix the support on valve
3.将联轴器的一端套在阀门芯轴上
Suit an the valve core axle one end of shaft couping
4.用手柄驱动电动执行机构至全闭位置(指针正指SHUT处零开度刻度线处),将输出轴插入联轴器四方孔内。
Urge electronic executive body to close position(indicator
mean with handle shut zero tum on one degree of scale marks)all, insert the output shaft hen shaft coupling all sides in the hole
5.坚固支架与电动执行机构和阀体间的连接螺栓。
Connection bolt among firm support and electronic executive body and bod of valve
6.用手柄转动执行机构,确认运行平稳、无偏心、无歪斜、检查阀门在执行机构开度计指示范围能否实现全闭和全开
Potete the executive body with the handle, partial, does not have and crooked that confirm operating steadily, Not having check valve turn on degree count, instruct the range will you please realize, close and tum on all in executive
注意:用力不可过猛,否则会导致执行机构超程运行而造成损坏。
Attention: t exerts oneself to be can t too quickly, otherwise, it wil lead to the fact executive body exceed body Cheng run and cause the damage
特点:
1.高可靠性、免维护。
2.体积小、重量轻。
3.结构简单,调节精度高,重复性误差小。
4.高性价比。详情联系王经理:153,8032,9557(wei 信同号)
扭矩:20~2000NM(实际输出扭矩值大于所标称的扭矩,即:1.3×标称扭矩)
控制电源:AC220V其他电源等级可与公司约定制作。
动作模式:开关、电阻反馈、电流信号反馈、无源触点反馈、电子式智能控制
动作角度:0~90°(最大回转角度可设定为180°)
动作精度:≤0.3%
死区:≤0.2%
连接方式:支架及轴套安装固定(需保证机械安装精度,消除传动间隙)
防护等级:IP65
环境温度范围:≤60℃
检测标准:JB/T8219-1999
适配阀门:球阀、V型调节阀、蝶阀、通风阀门、风门、风机、动态平衡阀、旋塞阀等各种部分回转阀门以及其他工业领域中的机械定位转动。
【商家简介】 扬州瑞浦执行器制造有限公司主要经营:执行器、仪器仪表、电动阀门、机电成套设备、环保设备以及流体控制设备研发、生产、销售、安装和维修。(依法须经批准的项目,经相关部门批准后方可开展经营活动)等产品。公司尊崇踏实、拼搏、责任的企业精神,并以诚信、共赢、开创经营理念,创造良好的企业环境,以全新的管理模式,完善的技术,周到的服务,卓越的品质为生存根本,我们始终坚持用户至上 用心服务于客户,坚持用自己的服务去打动客户。...- 下一产品:兴隆蒸汽夹层锅 卤肉制品夹层锅
- 上一产品:六氟化硫在线式报警器 配电组SF6气体报警器