1.安装环境要求The requirement of installation environment
●本产品既可在室内安装,也可在室内安装。
This product can be installed indoors, can also install outdoors
●本产品属非防爆产品,请注意避开易燃、易爆环境
This product belongs to the non-anti-blast products, please pay atlention to avoiding the flammable, explosive environment.
●在长期有雨水、原粮等飞溅物和阳光直射的环境,需要安装保护整台电动执行机构的防护
装备。详情联系王经理:153,8032,9557(wei 信同号)
In the environment where have the rainwater raw materials such splash thing and that shoot direstly of sunshine for a long time need o install the protective equipment for protecting whole Electric execute instiution
●请预留接线、手动操作等维修用空间。
Please reserve wiring, manual operation, ctand maintain and use the space.
●周边环境温度-30℃-+60℃范围内。
Peripheral ambient temperature-30 C is-in+ 60 C range
2.工作介质温度的要求
Requirement for the job medium temperature
●与阀门配套使用时,工作介质温度传到执行机构上面,执行机构温度会升高。
While using with the valve together the job medium temperature is passed to the executive body, the temperature of executive body will rise 详情联系王经理:153,8032,9557(wei 信同号)
工作介质是高温时,与阀门连接的支架起减少热传导的作用。
Workin the job medium is at a high temperature, the support connected with the valve plays a role in reducing the heat-conduction
●工作介质温度60℃以下时请选用标准支架。
Please select the standard support for usu When the job medium temperature is under 60 C
●工作介质温度60℃以上时请选用高温支架。
More than 60 t of job medium temperature lease select the high-temperature support fir use
3.现场电线管、电缆线安装要求
The requirement of the electric wire tube. cable install on-the-spot
用电线管时,请按图图(3)安装 详情联系王经理:153,8032,9557(wei 信同号)
When being in charge of electric wire. please install according to the picture(3).
1电线管外径是Φ9-ゆ11的电缆。
A cable that the electric wire s extemal diameter in o9-011
2要充分采取防水对策
Fully adopt the waterproof countermeasure
3执行机构应高于电线管,使电线管内水珠不至流进机构以确保其安全。
The executive body should be higher than the electric wire to manage, he drops of water are unlikely to flow into to hold
the organization in order to guarantee its security in making the electric wire in change of
特点:
1.高可靠性、免维护。
2.体积小、重量轻。
3.结构简单,调节精度高,重复性误差小。
4.高性价比。详情联系王经理:153,8032,9557(wei 信同号)
扭矩:20~2000NM(实际输出扭矩值大于所标称的扭矩,即:1.3×标称扭矩)
控制电源:AC220V其他电源等级可与公司约定制作。
动作模式:开关、电阻反馈、电流信号反馈、无源触点反馈、电子式智能控制
动作角度:0~90°(最大回转角度可设定为180°)
动作精度:≤0.3%
死区:≤0.2%
连接方式:支架及轴套安装固定(需保证机械安装精度,消除传动间隙)
防护等级:IP65
环境温度范围:≤60℃
检测标准:JB/T8219-1999
适配阀门:球阀、V型调节阀、蝶阀、通风阀门、风门、风机、动态平衡阀、旋塞阀等各种部分回转阀门以及其他工业领域中的机械定位转动。
【商家简介】 扬州瑞浦执行器制造有限公司主要经营:执行器、仪器仪表、电动阀门、机电成套设备、环保设备以及流体控制设备研发、生产、销售、安装和维修。(依法须经批准的项目,经相关部门批准后方可开展经营活动)等产品。公司尊崇踏实、拼搏、责任的企业精神,并以诚信、共赢、开创经营理念,创造良好的企业环境,以全新的管理模式,完善的技术,周到的服务,卓越的品质为生存根本,我们始终坚持用户至上 用心服务于客户,坚持用自己的服务去打动客户。...- 下一产品:舒兰村名牌
- 上一产品:DCL-10 10B 10E精小型调节型电动执行器