产品描述:聚丙烯巨箭jukam g-922 PP专用使用了专门用于PP塑料合成树脂单组分胶粘剂。
Product Description: Polypropylene giant arrow jukam g-922 PP special use for PP plastic synthetic resin single component adhesive.
Contact Mr. Yu:13416665501
无刺激气味,环保,无需处理材料表面,粘接后,可在室温下固化,定位时间适中,粘接强度高!良好的耐候性、耐酸碱性好!而且透明、无色,不影响产品的美观!常用于PP、塑料、金属、木材、石材、玻璃、陶瓷、布、皮革等材料的粘接。由于干燥时间适中,涂层性能良好,适用于中、大面积粘接!
No irritation odor, environmental protection, no need to deal with the surface of the material, after bonding, can be cured at room temperature, positioning time is moderate, high bonding strength! Good weather resistance, good acid and alkali resistance! And transparent, colorless, does not affect the appearance of the product! Commonly used in PP, plastic, metal, wood, stone, glass, ceramics, cloth, leather and other materials bonding. Due to moderate drying time, coating performance is good, suitable for medium and large area bonding!
操作说明:步:表面处理:表面处理,首先要去除材料表面的油或灰尘。.
步:施胶:分为单面双面施胶
施胶两种:单面胶(胶水要涂上稍微厚厚一层)使两侧加压紧密!
双面胶:双面涂(胶层可涂少许薄层),晾约5-8分钟,直至手接触胶体,粘手,但不拉伸合适,然后粘接,压紧,使两侧紧密贴合
单面双面涂胶及对比:单面胶可节省胶水,简化工艺,提高生产效率,但完全固化时间长,比双面胶粘合强度稍差。
第三步:固化:胶粘剂立即有一定强度,24小时完全固化,可做损伤试验!
Operating instructions: The first step: surface treatment: surface treatment, first of all to remove the material surface of the oil or dust. The
The second step: sizing: divided into single-sided double-sided sizing
Sizing two: single-sided adhesive (glue to be coated with a little thick layer) so that both sides of the pressure tight!
Double-sided adhesive: double-sided coating (glue can be coated with a little thin layer), dry for about 5-8 minutes until the hand contact colloid, sticky hand, but not stretched properly, and then bonding, pressing, so that both sides close Together
Single-sided double-sided adhesive and contrast: single-sided adhesive can save glue, simplify the process, improve production efficiency, but the full curing time is longer than the double-sided adhesive bonding strength slightly worse.
The third step: curing: adhesive immediately have a certain strength, 24 hours completely cured, do damage test!
【商家简介】东莞市景舜复合材料有限公司于1993年在东莞大岭山投资建成,是国内最具竞争力胶粘剂专业制造厂家之一,工厂拥有一批高素质研发团队及工程技术人员,配备世界先进生产设备。自产品问世以来,营销全国各地及美、日、欧、中东市场,质高价平的产品优势深受广大客户青睐。 东莞市景舜复合材料有限公司旗下四大品牌:巨箭JUKAM、全能王QNVOR、胶匠JOJON、KEYDAK,所有产品均通过欧美环保认证,应用材质涵盖:工程塑料,ABS,不饱和聚酯,聚乙烯,聚丙烯,硅橡胶,EPDM,压克力,橡胶(天然橡胶、丁基橡胶),玻璃(普通...