VIP标识免费B2B电子商务平台,企业网络营销推广网站 | RSS订阅 免费
 

泰州NSK轴承61918-Z防锈的正规流程带来的效果

  • 泰州NSK轴承61918-Z防锈的正规流程带来的效果
    产品图片产品图片产品图片
  • 单 价:19.80元/套

    产品/服务:NSK轴承61918

    品 牌:NSK轴承 

    包装:商包

    质量体系:ISO9000

    质量保证:合同签罚

    供货总量:3000 套起 订:1 套

    发货期限:自买家付款之日起 3 天内发货

    所在地:江苏 无锡

    有效期至:长期有效

    最后更新:2019-04-12 16:44

    浏览次数:4704

    询价

公司基本资料信息
 
产品详细说明
 防锈材料的质量直接影响产品的加工质量。因此,在选择防锈材料时,首先要根据质量要求对材料的理化性能进行检测,然后通过中试对合格的材料进行检测,以便根据质量大量使用。要求。奖赏。技术要求。泰州NSK轴承所选的防锈配件入厂后按不同材质的质量标准严格检验,合格后送供货部使用。为了确保溶液的浓度和比例满足工艺要求和使用性能,在使用过程中定期测试防锈材料和制备的溶液。建立完善的材料验收体系和质量验收标准,为防锈管理提供了可靠的保证。

The quality of antirust materials directly affects the processing quality of products. Therefore, in the selection of rust-proof materials, the physical and chemical properties of materials should be tested according to the quality requirements first, and then the qualified materials should be tested through pilot test, so as to be used in large quantities according to the quality. Requirement. Reward. Technical requirements. The rust-proof fittings selected by NSK bearings in Taizhou are strictly inspected according to the quality standards of different materials after they are imported into the factory and sent to the supply department for use after they are qualified. In order to ensure that the concentration and proportion of the solution meet the technological requirements and service performance, the rust-proof material and the prepared solution are regularly tested during the use process. The establishment of a sound material acceptance system and quality acceptance criteria provides a reliable guarantee for rust prevention management.

冷*却水在泰州NSK轴承加工中具有许多功能,如冷*却、润滑、清洗、防锈等。正确使用和维护将直接影响工件的表面质量和刀*具的使用寿命。轴承冷*却水大致可分为苏打水、**化液和合成磨削液。基本上,50t以上的液体可用于大规模回收。油端、铁屑、砂轮等磨削产品容易清洗,导致冷*却水变质、加工零件烧*伤、生锈。加强冷*却水的科学管理,可以提高冷*却水的性能,保证泰州NSK轴承产品质量,降低冷*却水的使用成本。

Cold water has many functions in the processing of NSK bearings in Taizhou, such as cold water, lubrication, cleaning, anti-rust and so on. Proper use and maintenance will directly affect the surface quality of the workpiece and the service life of the tool. Bearing cold water can be roughly divided into soda water, * * liquid and synthetic grinding fluid. Basically, more than 50t of liquid can be used for large-scale recycling. Grinding products such as oil ends, iron chips and grinding wheels are easy to clean, which results in deterioration of cold water, burns and rusts of processed parts. Strengthening the scientific management of cooling water can improve the performance of cooling water, ensure the quality of NSK bearings in Taizhou, and reduce the cost of using cooling water.

为了保证防锈技术的实施,科技部根据技术要求、零部件和生产设备的评价值,制定了具体的评价规则。**一*级防锈管理人员应当对生产设施进行月度工艺纪律*检查,对冷*却水、防锈液、清洗液、防锈油、腐蚀速度、清洗和涂油包装的管理进行综合检查。NG。NG。对产品老化、管理水平和防锈人员的泰州NSK轴承监测项目进行全*面检查。检验结果将分发给生产厂。从上到下,建立了防腐管理网络,为防腐管理提供依据。

In order to ensure the implementation of anti-rust technology, the Ministry of Science and Technology has formulated specific evaluation rules according to the technical requirements, evaluation values of spare parts and production equipment. Grade I anti-rust managers shall conduct monthly process discipline inspection of production facilities, and conduct comprehensive inspection of the management of cold water, anti-rust fluid, cleaning fluid, anti-rust oil, corrosion rate, cleaning and oil-coated packaging. NG. NG. The product's aging, management level and anti rust personnel's Taizhou NSK bearing monitoring project will be inspected thoroughly. The inspection results will be distributed to the production plant. From top to bottom, an anti-corrosion management network has been set up to provide basis for anticorrosion management.

1。当大量轴承需要清洗时,应将油封和90~100℃之间的热油清洗工具去除,然后用清水清洗多余的油,油加热一段时间,然后进行**后一步热蒸汽。

1. When a large number of bearings need to be cleaned, the hot oil cleaning tool between the oil seal and 90-100 C should be removed, then the excess oil should be cleaned with clean water, the oil heated for a period of time, and then the hot steam should be carried out after **.

2。清洗轴承表面时,应选择清洁汽油和煤油进行清洗。确认后,清洗后,用干净的布擦拭轴承,然后涂抹润滑剂。然后按照泰州NSK轴承标准安装过程安装轴承。

2. When cleaning the bearing surface, clean gasoline and kerosene should be selected for cleaning. After /confirm/iation, after cleaning, wipe the bearings with clean cloth, then apply lubricant. Then install the bearing according to the installation procedure of Taizhou NSK bearing standard.

3。当所有的检查都准备好加油和打开轴承时,轴承应该放置在清洁的液体中,如汽油中,然后整个轴承组应该轻轻旋转,以获得通道和碎片、清洁表面。

3. When all inspections are ready to refuel and open the bearings, the bearings should be placed in clean liquids, such as gasoline, and then the entire bearing group should be rotated gently to obtain passages and debris and clean surfaces.

 

文章来自:泰州SKF轴承 www.wh-skf.com

The article is from: Taizhou SKF bearing www.wh-skf.com

文章来自:泰州INA轴承 www.ina-china.cn

The article is from: Taizhou INA bearing www.ina-china.cn

文章来自:泰州NSK轴承 www.klbbearings.com

The article is from: Taizhou NSK bearing www.klbbearings.com

 

QQ:524085168

电话:0510-81207777

手机:13311666672/13395185757

商家简介】鸿御(上海)国际贸易有限公司是一家以进口轴承销售为主的机电公司,公司位于上海,本公司在工业领域已有多年的轴承配套及工业服务经验,在新老客户有着良好的口碑。公司专业代理进口轴承,涉及品牌:德国FAG轴承、INA轴承,日本NSK轴承、IKO轴承、KOYO轴承、NACHI轴承,瑞典进口轴承,美国TIMKEN轴承等,涉及种类:向心球轴承、向心球面轴承、深沟球轴承、向心球面滚子轴承、圆柱滚子轴承、滚针轴承、向心推力球轴承等。销售行业主要包括:工矿企业、钢厂、机械设备、铁路、工程机械发电厂、石化机械、钻机等 公司以先...
 
温馨提示温馨提示】以上是鸿御(上海)国际贸易有限公司供应的深沟球轴承--NSK轴承61918-泰州NSK轴承61918-Z防锈的正规流程带来的效果的详细信息,欢迎您在驿路商务查看深沟球轴承的新的价格、厂家、型号、图片等信息。本页所展示的信息由企业自行提供,内容的真实性、准确性和合法性由发布企业负责,"驿路商务"对此不承担任何保证责任。同时郑重提醒各位买/卖家,交易前请详细核实对方身份,切勿随意打款或发货,谨防上当受骗。如发现虚假信息,请积极举报。[我要举报]
 

更多>>企业热门产品

相关产品推荐:

 
按头字母拼音查找产品: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
©2008-2022 东莞市驿铭网络科技有限公司 版权所有
免责声明:本站所展示的信息及服务皆由企业或个人自行提供,内容的真实性、准确性和合法性一律由发布者负责。
粤公网安备 44190002000523号 粤ICP备16047932号