VIP标识免费B2B电子商务平台,企业网络营销推广网站 | RSS订阅 免费
 

镇江NSK轴承6118异物与漆锈的预防方式

  • 镇江NSK轴承6118异物与漆锈的预防方式
    产品图片产品图片产品图片
  • 单 价:19.80元/套

    产品/服务:NSK轴承6118

    品 牌:NSK轴承 

    包装:商包

    质量体系:ISO9000

    质量保证:假一罚百

    供货总量:3000 套起 订:1 套

    发货期限:自买家付款之日起 3 天内发货

    所在地:江苏 无锡

    有效期至:长期有效

    最后更新:2018-10-18 22:24

    浏览次数:431

    询价

公司基本资料信息
 
产品详细说明
 高温镇江NSK轴承的使用寿命与制造、安装和使用密切相关。只有做好各环节的工作,才能使轴承处于良好工作状态,从而延长轴承的使用寿命。

The service life of high temperature Zhenjiang NSK bearings is closely related to manufacture, installation and use. only by doing a good job in all links can the bearing be in good working condition, thus prolonging the service life of the bearing.

防止异物的安装:在转子动平衡轴承中,铁的动平衡非常简单,所以以前安装动平衡轴承。为了便于安装,一些制造商通过在轴承腔中添加一些油或润滑脂来达到平滑的效果,但是操作人员常常难以控制油或润滑脂的数量,如果更多的油或润滑脂积聚在轴承腔中,则滚动轴承。轴是非常简单的进入高温镇江NSK轴承的内部部分。不要在轴承腔内涂抹润滑脂或油脂。如有必要,不要在轴承腔中积聚。

Prevent the installation of foreign bodies: In rotor dynamic balancing bearings, the dynamic balance of iron is very simple, so before the installation of dynamic balancing bearings. To facilitate installation, some manufacturers add some oil or grease to the bearing cavity to achieve a smooth effect, but operators often have difficulty controlling the amount of oil or grease, if more oil or grease accumulates in the bearing cavity, then the rolling bearing. The shaft is very simple to enter the internal part of the high temperature Zhenjiang NSK bearing. Do not apply grease or grease in the bearing cavity. If necessary, do not accumulate in the bearing cavity.

防止油漆腐蚀:密封电机经常被油漆腐蚀。电机在安装过程中声音非常好,但经过一段时间后,在仓库中,电机的异常声音变得非常大,当轴承、轴承严重锈蚀时。许多制造商习惯于认为轴承是一个问题,我们继续汽车制造商已经认识到主要问题是缘涂料。这一问题主要是由于一定的温湿度、缘漆酸蒸发、形成腐蚀性物质、腐蚀和高温镇江NSK轴承滚道损坏造成的。目前,只能选用好的缘清漆,干燥后还要安装一段时间。

Prevent paint corrosion: seal motor is often corroded by paint. The sound of the motor is very good during the installation, but after a period of time, the abnormal sound of the motor becomes very large in the warehouse, when the bearings and bearings are seriously corroded. Many manufacturers are used to thinking of bearings as a problem, and we continue to recognize that the main problem is insulation paint. This problem is mainly due to certain temperature and humidity, insulation acid evaporation, the formation of corrosive substances, corrosion and high temperature Zhenjiang NSK bearing raceway damage caused. At present, only good insulating varnish can be selected, and it will be installed for some time after drying.

控制轴选择和轴承室服务:滚动轴承压入轴承时应敏锐,不堵塞。如果存在明显的滚动不灵敏性和轴尺寸过大,则应减少维护。如果轴承被压入轴内,滚动时,会有明显的“沙子”感,可能过大或轴的圆度不好。因此,轴承室的轴控制和公共服务也应该取得很好的控制。目前,国内许多厂家只控制公共服务,而不是圆度。

Control shaft selection and bearing room service: when rolling bearings are pressed into bearings, they should be sharp and not clogged. If there is obvious rolling insensitivity and shaft size is too large, then maintenance should be reduced. If the bearing is pressed into the shaft, rolling, there will be obvious "sand" feeling, may be too large or shaft roundness is not good. Therefore, the shaft control and public service of the bearing chamber should also be well controlled. At present, many domestic manufacturers only control public services, not roundness.

轴承安装:因为镇江NSK轴承是高精度产品,如轴承安装不当很容易损坏,导致高温轴承损坏。轴承安装时应采用特殊模具,不能引爆,当压缩轴只有小环时,根据环量大。安装过程中需要压力或液压。按压时,上下感觉应在水平外。如果有一个歪斜,轴承滚道将损坏的力量和轴承将被引导。

Bearing Installation: Because Zhenjiang NSK bearings are high-precision products, such as improper bearing installation is easy to damage, resulting in high-temperature bearing damage. Bearings should be installed with special molds, can not be detonated, when the compression shaft only small ring, according to the large number of rings. Pressure or hydraulic pressure is required during installation. When pressing, the feeling of up and down should be outside the level. If there is a skew, the bearing raceway will damage the force and the bearing will be guided.

 

文章来自:镇江SKF轴承 www.wh-skf.com

The article is from: Zhenjiang SKF bearing www.wh-skf.com

文章来自:镇江INA轴承 www.ina-china.cn

The article is from: Zhenjiang INA bearing www.ina-china.cn

文章来自:镇江NSK轴承 www.klbbearings.com

The article is from: Zhenjiang NSK bearing www.klbbearings.com

 

QQ:524085168

电话:0510-81207777

手机:13311666672

 

 

商家简介】鸿御(上海)国际贸易有限公司是一家以进口轴承销售为主的机电公司,公司位于上海,本公司在工业领域已有多年的轴承配套及工业服务经验,在新老客户有着良好的口碑。公司专业代理进口轴承,涉及品牌:德国FAG轴承、INA轴承,日本NSK轴承、IKO轴承、KOYO轴承、NACHI轴承,瑞典进口轴承,美国TIMKEN轴承等,涉及种类:向心球轴承、向心球面轴承、深沟球轴承、向心球面滚子轴承、圆柱滚子轴承、滚针轴承、向心推力球轴承等。销售行业主要包括:工矿企业、钢厂、机械设备、铁路、工程机械发电厂、石化机械、钻机等 公司以先...
 
温馨提示温馨提示】以上是鸿御(上海)国际贸易有限公司供应的深沟球轴承--NSK轴承6118-镇江NSK轴承6118异物与漆锈的预防方式的详细信息,欢迎您在驿路商务查看深沟球轴承的新的价格、厂家、型号、图片等信息。本页所展示的信息由企业自行提供,内容的真实性、准确性和合法性由发布企业负责,"驿路商务"对此不承担任何保证责任。同时郑重提醒各位买/卖家,交易前请详细核实对方身份,切勿随意打款或发货,谨防上当受骗。如发现虚假信息,请积极举报。[我要举报]
 

更多>>企业热门产品

相关产品推荐:

 
按头字母拼音查找产品: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
©2008-2022 东莞市驿铭网络科技有限公司 版权所有
免责声明:本站所展示的信息及服务皆由企业或个人自行提供,内容的真实性、准确性和合法性一律由发布者负责。
粤公网安备 44190002000523号 粤ICP备16047932号